Model DHJ is an industrial-duty hoist/jackshaft operator with an internal door lock sensor. It features a removable hinged electrical box cover, a continuous-duty high-starting torque motor, a universal-mount frame design, industrial ball bearings on the output shaft and an emergency chain hoist with electric interlock. Price shown is for a 1/3hp operator.
Heat dectectors provide an alarm signal that activates the release device when the ambient temperature reaches a fixed point. They are available in fixed temperatures of 135 and 194 degrees Fahrenheit.
The FDR plug-in option card is for use in conjunction with the LiftMaster® Logic 3-equipped operator. It facilitates field connections between the LM21AFCB and the operator by reducing the standard 10-wire interconnection to a basic 4-wire phone cord. Both the FDRCARD and the AFCB are equipped with an RJ-11 phone jack as standard to accept the phone cord. The FDRCARD also eliminates the need...
A speaker/strobe is an audible/visual notification device used in conjunction with our optional Voice Board. The speaker/strobe is available in 12VDC, 24VDC, or 120VAC. A stand-alone speaker is also available. All speaker/strobes are ADA-compliant
This transformer is used in conjunction with an AFCB model when line voltages other than 120VAC are present at the door installation. Transformers are mounted within an UL508 approved enclosure and are available in the following two options: 90-TRNSFRMR-2 (208VAC 1/3 Phase, 230/460VAC 3 Phase), and 90-TRNSFRMR-5 (575VAC 3 Phase).
A solid-state speech module, the optional voice board (VB) may be ordered factory-installed within the XPBB or AFCB models, or purchased separately for retro-fit applications. In an alarm condition, the voice board will provide a warning tone followed by a voice message/warning prior to door closure. It can be used with up to two speaker/strobes or stand-alone speakers.
Model GH is a heavy industrial-duty gear-reduced hoist operator. It features a removable hinged electrical box cover and is easily field-converted in seconds for a left or right-handed drive and hoist. Price shown is for a 1hpoperator.
The AFCB fire door release device is designed to be used in conjunction with a standard commercial door operator to provide a fully automated door closing system. For use with motorized doors incorporating a reversing electric safety edge. This 120VAC device can power up to four smoke detectors and two horn/strobes or speaker/strobes. This system combines state-of-the-art functionality and...
The XP fire door release device provides a fail-safe release mechanism for non-motorized doors and acts as an interface between the door and fire alarm system. The device requires 24VDC power from an approved UL1481 regulated power supply iwth Battery Backup, such as a fire alarm control panel. Therefore, installation will require coordination with a fire panel installer.
Transcore AT5102 interior mount 915 mhz access control tag. Passive, no battery, beam-powered for unlimited service life. Velcro windshield mounts available. Factory Programmed to your specifications, with up to 10 6-bit alphanumeric characters of client data. This tag can also emulate Wiegand cards that use 26 to 54-bit Wiegand formats. Limited tag range to reduce competition with other nearby...